ClimaTop® Flexo
Acrylic, elastomeric, ready-to-use, water-repellent, decorative finishing render in pasty form
ClimaTop® Flexo is a decorative, ready-to-use in pastyform, acrylic, elastomeric, finishing render. It is based on a combination of UV-crosslinking, hydrophobically modified and water-repellent, highly elastic polymer dispersion, with natural granules of suitable graded granulometry and additional enhancers.
It is classified as finishing render based on organic binder according to the standard EN 15824 and as part of certified external thermal insulation system CLIMAWALL® by BIOCLIMA® according to EAD 040083-00-0404, as finishing render.
Advantages
- High dirt pick-up resistance & weather conditions.
- Water-repellent.
- Excellent elasticity.
- High color stability.
- Different decorative textures (depending on the treatment method during application).
- Can be tinted in hundreds of shades through the KRAFT INSPIRED COLOR Tinting System.
Product Information
Packaging:25 KG
Shades:It could be tinted with KRAFT Inspired Collection (F-shades) and KRAFT Reflective Collection fandecks.
Finishes / Granulometry
FINE (0,6 mm), K08 (0,8 mm), K10 (1,0 mm), K15 (1,5 mm), K20 (2,0 mm), R15 (1,5 mm)
Certifications / Evaluations
Technical Info
Technical Information
0%
1,4-3,7 kg/m²
1-2 hours
Application - Tools
Download the files
How to Use
To ensure better adhesion, the surface is required to be dry, clean and free of dust, oils, salts, rust, loose paint and residues, swollen paints, etc. The surface should be as flat as possible. Large unevenness and cracks must be repaired using suitable repairing products by KRAFT PAINTS, before applying ClimaTop® Flexo.
It is recommended that fresh concrete, stucco, plaster and gypsum surfaces are allowed to dry for at least 4 weeks before applying ClimaTop® Flexo. Apply a layer of ClimaTop® Primer on porous, new surfaces or already painted substrates, and also on cementitious base coat layer of external thermal insulation system.
The product does not require the addition of mixing water. Stir the product before use with a low-speed mechanical drill to homogenize.
After 24 hours of priming, apply a coat of ClimaTop® Flexo with a stainless steel spatula and adjust the coating thickness to grain size. Shape the decorative texture by properly treatment using a plastic spatula.
Immediately after the application the tools must be cleaned with warm water and soap or a detergent solution. Remove as much material as possible from tools before cleaning.
